Grip tabs
Raised tabs give your fingers a clear place to lift a mask.
StargazeWorks / Telescope accessories
Your telescope isn’t generic. Its gear shouldn’t be.
Premium dew shields and complete accessory kits made for the telescope model you choose. Start with light control, then build your matching setup.
For Celestron, Sky-Watcher, Meade, Orion, Apertura & Zhumell. See supported telescope models
Made to order · Normally dispatches in 1–3 business days · Free U.S. standard shipping $70+
- Sized by telescope model
- The model you select determines the part size you receive.
- Made to order in CF-PETG
- Carbon-fiber-reinforced PETG runs across the accessory system.
- Fit replacement promise
- Confirmed fit or manufacturing issues reported within 30 days are eligible for a free replacement.
Start with your telescope
Shop by telescope.
Model-specific accessories for Celestron, Sky-Watcher, Meade, Orion, Apertura & Zhumell.
From NexStar and Evolution to Skymax, ETX, LX90/LX200 and Dobsonian models, choose your exact telescope on the product page. Available models vary by accessory.
View supported telescope models
These are the telescope options available across the store. Model choices vary by product; each product page shows the exact options available for that accessory. Choose the full model name, not the aperture alone.
- Apertura AD8 Dob
- Celestron 127SLT Mak
- Celestron 130EQ / 130SLT
- Celestron 4SE Mak
- Celestron 6in Dob
- Celestron 8in Newt
- Celestron C11 SCT / CPC 1100 / AVX 11 SCT
- Celestron C5 SCT / 5SE SCT
- Celestron C6 SCT / 6SE SCT / Evo 6 SCT
- Celestron C8 SCT / 8SE SCT / Evo 8 SCT / CPC 800 / EdgeHD 8 / AVX 8 SCT / CGX 800
- Celestron C9.25 SCT / EdgeHD 925 / CPC 925 / Evo 9.25
- Meade ETX-105 Mak
- Meade ETX-125 Mak
- Meade ETX-90 Mak
- Meade LX200 10in ACF
- Meade LX200 8in SCT
- Meade LX90 10in ACF
- Meade LX90 8in SCT
- Orion XT10 10in Dob / Apertura AD10 Dob / Zhumell Z10 Dob
- Orion XT8 8in Dob
- Sky-Watcher 127 Mak
- Sky-Watcher 130P
- Sky-Watcher 150 Mak
- Sky-Watcher 150P / 150PDS
- Sky-Watcher 200P Dob
- Sky-Watcher 250P Dob
- Sky-Watcher Flx 200P
- StarSense 10in Dob
- SW Quattro 150P
- Zhumell Z8 Dob
The masks and dust cap fit your telescope directly or the matching StargazeWorks shield. Choose pieces for the same telescope model.
Start with the problem
What’s getting in the way tonight?
Start with the Complete Premium Kit for one matching system, or choose the Premium Dew Shield for dew protection and stray-light control. Add individual masks and caps as you need them.
01 / COMPLETE PREMIUM KIT
Build the whole setup.
A Premium Dew Shield, tri-Bahtinov mask, isolation mask and dust cap. One telescope-model selection brings the matching pieces together.
Shop Complete Premium Kit 02 / PREMIUM DEW SHIELDKeep stray light out.
A model-specific shield helps delay dew. Ray-traced internal rings help reduce off-axis stray light before it reaches your optics.
Shop Premium Dew Shield 03 / FOCUS + COLLIMATIONGet the stars sharp.
Bahtinov masks make focus visible as a diffraction pattern. Tri-Bahtinov and isolation masks help you assess focus and collimation one sector at a time.
Shop masks 04 / PROTECTIONClose up the scope.
Friction-fit dust caps cover the tube or a StargazeWorks shield between sessions.
Shop dust caps
Why the fit matters
Start with one model selection.
Choose your exact telescope model on the product page. The masks and dust cap fit both the telescope directly and the matching StargazeWorks shield, so you can use the setup that suits your session.
-
Choose your telescope.
Select the make and model shown on your scope.
-
Get the matching part size.
Your model selection maps to the version made for that telescope.
-
Use the setup you need.
Use the masks and cap on your telescope directly or on the matching shield. Choose pieces for the same model.
One system, two ways to fit: the matching masks and cap work with or without the shield.
Premium light control, made to fit
Made for your scope. Designed to control stray light.
The Premium Dew Shield combines a model-specific fit with ray-traced internal rings that help intercept off-axis light. It extends beyond the front optics to help delay dew, and works with matching masks and a dust cap.
Explore the Premium Dew Shield
Made for dark sites
Small details earn their keep after dark.
Tactile marks
Touch cues help identify pieces when you don’t want another light on.
Cable routing
The shield includes a notch for a dew-heater cable.
Start with your scope
The right accessory begins with the model on the tube.
Choose your exact telescope model, then start with the Complete Premium Kit or Premium Dew Shield. Matching masks and caps work directly on the telescope or on the shield.
Not sure which model you have? Ask us before ordering.